Skip to content

CALL US:

(310)834-7478

CALL US:

(310)834-7478

FREE SHIPPING On orders over $299

SHOP BY VEHICLE

Choose Your Ride

Control Arm Spacers – Buick Skylark 1975-1979 Pair – SPC

MF Part #: 95338
SKU: A0142

$45.99

  • Made in USA
  • Lifetime Warranty

1 in stock

DESCRIPTION

For the 1975-1979 Buick Skylark. SPC Lower Control Arm Spacer kits provide greater load distribution and ride height spacing when installed. If you’re running SPC lower control arms and using front coilover shocks, these control arm spacer kits are the perfect upgrade to get your stance dialed in.

This kit is sold in a set of 2 spacer plates. These SPC plates offer added support for your front coilovers when installed. Each plate raises your ride height approximately 1/2″ when used with SPC lower control arms. If you use one plate along with your coilovers and SPC lower arms you will gain about 1/2″ in ride height. If you use two plates on one side you will gain about 1″ in ride height (Order 2 of these kits if looking to double up spacing to achieve the 1” total lift on your lower SPC control arms).

Designed for SPC lower control arms for the GM G-Body, F-Body (2nd Gen), Full-Size, S-Line Trucks and 3rd Gen GM A-Body muscle cars. Bolt-on design suitable for any coilover using lower GM factory style T-bar or Trunnion mounts, mounting to SPC lower tubular control arms.

  • Sold as a Pair
  • Designed for use with SPC Lower Control Arms
  • Material: Steel
  • Finish: Natural
  • Use with GM T-Bar Style Lower Coilover Mounts
  • 1 Plate Raises Ride Height ½” when combined with SPC lower Control Arms
  • Hardware Included
  • Made in the U.S.A.
THIS PRODUCT FITS

1971-1985 Buick LeSabre
1973-1977 Buick Century
1973-1977 Buick Regal
1975-1979 Buick Skylark
1970-1981 Chevrolet Camaro
1973-1996 Chevrolet Caprice
1973-1977 Chevrolet Chevelle
1973-1977 Chevrolet El Camino
1973-1977 Chevrolet Malibu
1973-1977 Chevrolet Monte Carlo
1973-1996 Chevrolet Impala
1975-1979 Chevrolet Nova
1973-1977 Oldsmobile Cutlass
1975-1979 Oldsmobile Omega
1971-1985 Oldsmobile Delta 88
1971-1976 Pontiac Bonneville
1970-1981 Pontiac Firebird
1973-1975 Pontiac Grand Am
1973-1977 Pontiac Grand Prix
1973-1977 Pontiac LeMans
1978-1987 Buick Grand National
1978-1987 Buick Regal
1978-1988 Chevrolet El Camino
1978-1983 Chevrolet Malibu
1978-1988 Chevrolet Monte Carlo
1982-2004 Chevrolet Blazer
1982-2004 Chevrolet S10
1982-2004 GMC Jimmy
1982-2004 GMC S15
1982-2004 GMC Sonoma
1978-1988 Oldsmobile Cutlass
1982-1986 Pontiac Bonneville
1978-1980 Pontiac Grand Am
1978-1987 Pontiac Grand Prix
1978-1981 Pontiac LeMans

ADDITIONAL INFORMATION
  • Manufacturer: SPC
  • Manufacturer Part #: 95338
  • Material: Steel
  • Sold As: Pair
  • Hardware Included: Yes
  • Finish: Natural
  • Install Location: Lower Control Arm
  • Quantity: Sold as a Pair
  • Note: If you use one plate along with your coilovers and SPC lower control arms you will gain about 1/2" in ride height. If you use two plates, you will gain about 1" in ride height.
  • Vehicle Year: 1975-1979
  • Vehicle Make: Buick
  • Vehicle Model: Skylark
  • Vehicle Specific: Control Arm Spacers

For the 1975-1979 Buick Skylark. SPC Lower Control Arm Spacer kits provide greater load distribution and ride height spacing when installed. If you’re running SPC lower control arms and using front coilover shocks, these control arm spacer kits are the perfect upgrade to get your stance dialed in.

This kit is sold in a set of 2 spacer plates. These SPC plates offer added support for your front coilovers when installed. Each plate raises your ride height approximately 1/2″ when used with SPC lower control arms. If you use one plate along with your coilovers and SPC lower arms you will gain about 1/2″ in ride height. If you use two plates on one side you will gain about 1″ in ride height (Order 2 of these kits if looking to double up spacing to achieve the 1” total lift on your lower SPC control arms).

Designed for SPC lower control arms for the GM G-Body, F-Body (2nd Gen), Full-Size, S-Line Trucks and 3rd Gen GM A-Body muscle cars. Bolt-on design suitable for any coilover using lower GM factory style T-bar or Trunnion mounts, mounting to SPC lower tubular control arms.

  • Sold as a Pair
  • Designed for use with SPC Lower Control Arms
  • Material: Steel
  • Finish: Natural
  • Use with GM T-Bar Style Lower Coilover Mounts
  • 1 Plate Raises Ride Height ½” when combined with SPC lower Control Arms
  • Hardware Included
  • Made in the U.S.A.
Warning: Cancer and Reproductive Harm