Control Arm Spacers – Pontiac Tempest 1964-1967 Pair – SPC

For the 1964-1967 Pontiac Tempest. SPC Lower Control Arm Spacer kits provide greater load distribution and ride height spacing when installed. If you’re running SPC lower control arms and using front coilover shocks, these control arm spacer kits are the perfect upgrade to get your stance dialed in.

This kit is sold in a set of 2 spacer plates. These SPC plates offer added support for your front coilovers when installed. Each plate raises your ride height approximately 1/2″ when used with SPC lower control arms. If you use one plate along with your coilovers and SPC lower arms you will gain about 1/2″ in ride height. If you use two plates on one side you will gain about 1″ in ride height (Order 2 of these kits if looking to double up spacing to achieve the 1” total lift on your lower SPC control arms).

Designed for SPC lower control arms for the GM A-Body, F-Body (1st Gen), X-Body muscle cars. Bolt-on design suitable for any coilover using lower GM factory style T-bar or Trunnion mounts, mounting to SPC lower tubular control arms.

• Sold as a Pair
• Designed for use with SPC Lower Control Arms
• Material: Steel
• Finish: Natural
• Use with GM T-Bar Style Lower Coilover Mounts
• 1 Plate Raises Ride Height ½” when combined with SPC lower Control Arms
• Hardware Included
• Made in the U.S.A.