Coilover Bracket Kit – Aldan American (7000253) – 1988-1996 Chevrolet Corvette
$94.99
- Made in USA
- Lifetime Warranty
2 IN STOCK.
DESCRIPTION
This part fits 1988-1996 Chevrolet Corvette vehicles.
Setup your rear suspension for coilovers with this coilover bracket kit from Aldan American. This kit is designed to install into rear upper shock mounting locations for use of any standard coilovers (sold separately). Inside upper bracket tab where the coilover will mount has a width of 1.375” and uses ½” hardware, included. These brackets will work with any standard coilover shock. Brackets are designed to be used with factory independent rear ends for the C4 Corvette. These brackets are used with Aldan American 1988-1996 Chevrolet Corvette (C4), rear coilover kits (coilovers sold separately).
- Includes a pair of rear, upper brackets and mounting hardware
- Designed to convert factory rear, upper shock mounts to coilover mounts
- Grade 8 mounting hardware Included
- Tab width to mount the coilover is 1.375” wide x ½” I.D. top
- Brackets are black powdercoated for added corrosion resistance
RELATED PART NUMBERS
THIS PRODUCT FITS
1988-1996 Chevrolet Corvette
ADDITIONAL INFORMATION
- Vehicle Year: 1988-1996
- Vehicle Make: Chevrolet
- Vehicle Model: Corvette
- Vehicle Specific: Coilover Bracket Kit
This part fits 1988-1996 Chevrolet Corvette vehicles.
Setup your rear suspension for coilovers with this coilover bracket kit from Aldan American. This kit is designed to install into rear upper shock mounting locations for use of any standard coilovers (sold separately). Inside upper bracket tab where the coilover will mount has a width of 1.375” and uses ½” hardware, included. These brackets will work with any standard coilover shock. Brackets are designed to be used with factory independent rear ends for the C4 Corvette. These brackets are used with Aldan American 1988-1996 Chevrolet Corvette (C4), rear coilover kits (coilovers sold separately).
- Includes a pair of rear, upper brackets and mounting hardware
- Designed to convert factory rear, upper shock mounts to coilover mounts
- Grade 8 mounting hardware Included
- Tab width to mount the coilover is 1.375” wide x ½” I.D. top
- Brackets are black powdercoated for added corrosion resistance
| Weight | 4 lbs |
|---|---|
| Dimensions | 4 × 4 × 10 in |
| Vehicle Year | |
| Vehicle Make | |
| Vehicle Model | |
| Vehicle Specific |
