Control Arms – Chevrolet C1500 1988-1998 Front, Upper and Lower – Stone Fab
$1,089.99
- Made in USA
- Lifetime Warranty
2 IN STOCK.
DESCRIPTION
For the 1988–1998 Chevrolet C1500. Upgrade your 88-98 GM full-size truck with Stone Fab’s, fabricated upper and lower control arms. Made in the U.S.A. and designed for GM OBS trucks looking for the perfect stance and superior ride quality.
This kit includes upper and lower control arms that narrow the front track width 3″ overall (1.5″ per side) to increase front wheel clearance for wider wheels and tires. This is ideal for lowered trucks looking to run 5″ or more drop on their front suspension.
Stone Fab lower arms include 2″ of drop built-in, and when paired with coilovers (sold separately) and drop spindles (sold separately), you can achieve up to 6″ of total front drop.
These powder-coated arms ship fully assembled with Moog ball joints, polyurethane bushings, and mounting tabs for Stone Fab’s splined sway bar kit (sold separately).
Original inner and outer tie rods can be reused but must be trimmed 3/4″ each or upgraded to the Stone Custom Fab Heim joint steering linkage kit (sold separately)
If you’re looking to properly lower your 88-98 GMT400 series 2wd pickup or SUV with some of the best control arms on the market, look no further than Stone Fab’s upper and lower control arm setup.
*Note: Stock sway bars are not compatible with these control arms. You must use Stone Fab splined sway bar setup for proper fitment. *See Aldan American part number A0266 for the complete Sway Bar kit (Required)
*Note: See Aldan American part number A0267 for the Stone Fab Steering linkage kit.
*Note: Looking for coilovers? See Aldan American part number series 300220 for the Stone Fab series coilovers designed for these control arms.
- 2” Lowered, Front Control Arms
- Control Arm Location: Front
- Includes Stone Fab Upper and Lower Control Arms
- Narrows front track width 3″ overall (1.5″ per side)
- Polyurethane Bushings Included
- Upper and lower MOOG Ball Joints Included
- Control Arms – Black Powder Coat
- Bolt-on design for factory like fitment and easy installation
- Note: Stock sway bars are not compatible. Use Aldan Sway Bar Part #A0266
- Note: Tie Rods must be trimmed ¾” or use Aldan Part #A0267
- Made in the U.S.A.
THIS PRODUCT FITS
1988-1998 Chevrolet C1500
1988-1998 GMC C1500
1988-1998 Chevrolet Suburban
1988-1998 GMC C1500 Suburban
ADDITIONAL INFORMATION
- Manufacturer: Stone Fab
- Vehicle Make: Chevrolet
- Manufacturer Part #: stf-29-2
- Vehicle Model: C1500
- Control Arm Style: Tubular
- Position: Front, Upper and Lower
- Control Arm Material: Steel
- Direct Bolt On: Yes
- Ball Joint Included: Yes
- Bushing Material: Polyurethane
- Hardware Included: Yes
- Control Arm Color: Black
- Control Arm Finish: Powder Coat
- Adjustable: No Upper; No Lower
- Quantity: Kit: 1 Pair Upper, 1 Pair Lower
- Notes, Upper Control Arms: Brings front wheels in 1-1/2" EACH SIDE for increased clearance.
- Notes, Lower Control Arms: Lower arms have two inches of drop built in (Use Aldan American Coilover Part # 300220, 300221, 300250 or 300251). Lower arms have mounting tabs for Stone Fab splined sway bar kit (sold separately) S
- Vehicle Year: 1988-1998
- Vehicle Specific: Control Arms
For the 1988–1998 Chevrolet C1500. Upgrade your 88-98 GM full-size truck with Stone Fab’s, fabricated upper and lower control arms. Made in the U.S.A. and designed for GM OBS trucks looking for the perfect stance and superior ride quality.
This kit includes upper and lower control arms that narrow the front track width 3″ overall (1.5″ per side) to increase front wheel clearance for wider wheels and tires. This is ideal for lowered trucks looking to run 5″ or more drop on their front suspension.
Stone Fab lower arms include 2″ of drop built-in, and when paired with coilovers (sold separately) and drop spindles (sold separately), you can achieve up to 6″ of total front drop.
These powder-coated arms ship fully assembled with Moog ball joints, polyurethane bushings, and mounting tabs for Stone Fab’s splined sway bar kit (sold separately).
Original inner and outer tie rods can be reused but must be trimmed 3/4″ each or upgraded to the Stone Custom Fab Heim joint steering linkage kit (sold separately)
If you’re looking to properly lower your 88-98 GMT400 series 2wd pickup or SUV with some of the best control arms on the market, look no further than Stone Fab’s upper and lower control arm setup.
*Note: Stock sway bars are not compatible with these control arms. You must use Stone Fab splined sway bar setup for proper fitment. *See Aldan American part number A0266 for the complete Sway Bar kit (Required)
*Note: See Aldan American part number A0267 for the Stone Fab Steering linkage kit.
*Note: Looking for coilovers? See Aldan American part number series 300220 for the Stone Fab series coilovers designed for these control arms.
- 2” Lowered, Front Control Arms
- Control Arm Location: Front
- Includes Stone Fab Upper and Lower Control Arms
- Narrows front track width 3″ overall (1.5″ per side)
- Polyurethane Bushings Included
- Upper and lower MOOG Ball Joints Included
- Control Arms – Black Powder Coat
- Bolt-on design for factory like fitment and easy installation
- Note: Stock sway bars are not compatible. Use Aldan Sway Bar Part #A0266
- Note: Tie Rods must be trimmed ¾” or use Aldan Part #A0267
- Made in the U.S.A.
| Weight | 60 kg |
|---|---|
| Dimensions | 10.00 × 20.00 × 20.00 cm |
| Manufacturer | |
| Vehicle Make | |
| Manufacturer Part # | |
| Vehicle Model | |
| Control Arm Style | |
| Position | |
| Control Arm Material | |
| Direct Bolt On | |
| Ball Joint Included | |
| Bushing Material | |
| Hardware Included | |
| Control Arm Color | |
| Control Arm Finish | |
| Adjustable | |
| Quantity | |
| Notes, Upper Control Arms | Brings front wheels in 1-1/2" EACH SIDE for increased clearance. |
| Notes, Lower Control Arms | |
| Vehicle Year | |
| Vehicle Specific |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.