Coilover Bracket Kit – Aldan American (7000248) – 1979-2004 Ford Mustang
$368.99
- Made in USA
- Lifetime Warranty
5 IN STOCK.
DESCRIPTION
This part fits 1979-2004 Ford Mustang vehicles.
Setup your rear suspension for coilovers with this coilover bracket kit from Aldan American. This kit is designed to install into rear upper and lower shock mounting locations for use of any standard coilovers (sold separately). Inside upper bracket tab where the coilover will mount has a width of 1.5” and uses ½” hardware, included. Lower mount is 1.375” wide and uses ½” hardware, included. These brackets will work with any standard coilover shock. Lower brackets are designed to be used with factory rear ends (These brackets will not work with aftermarket rear ends) These brackets are used with Aldan American 79-04 Ford Mustang, rear coilover kits (coilovers sold separately). Note – Will not fit Cobra models with factory IRS.
- Includes upper and lower coilovers brackets and mounting hardware
- Designed to convert factory rear, upper and lower shock mounts to coilover mounts
- Note – Will not fit Cobra models with factory IRS
- Grade 8 mounting hardware Included
- Tab width to mount the coilover is 1.5” wide x ½” I.D. top
- Tab width to mount the coilover is 1.375” wide x ½” I.D. bottom
- Brackets are black powdercoated for added corrosion resistance
RELATED PART NUMBERS
THIS PRODUCT FITS
1979-2004 Ford Mustang
ADDITIONAL INFORMATION
- Vehicle Year: 1979 or 1980 or 1981 or 1982 or 1983 or 1984 or 1985 or 1986 or 1987 or 1988 or 1989 or 1990 or 1991 or 1992 or 1993 or 1994 or 1995 or 1996 or 1997 or 1998 or 1999 or 2000 or 2001 or 2002 or 2003 or 2004
- Vehicle Make: Ford
- Vehicle Model: Mustang
- Vehicle Specific: Coilover Bracket Kit
This part fits 1979-2004 Ford Mustang vehicles.
Setup your rear suspension for coilovers with this coilover bracket kit from Aldan American. This kit is designed to install into rear upper and lower shock mounting locations for use of any standard coilovers (sold separately). Inside upper bracket tab where the coilover will mount has a width of 1.5” and uses ½” hardware, included. Lower mount is 1.375” wide and uses ½” hardware, included. These brackets will work with any standard coilover shock. Lower brackets are designed to be used with factory rear ends (These brackets will not work with aftermarket rear ends) These brackets are used with Aldan American 79-04 Ford Mustang, rear coilover kits (coilovers sold separately). Note – Will not fit Cobra models with factory IRS.
- Includes upper and lower coilovers brackets and mounting hardware
- Designed to convert factory rear, upper and lower shock mounts to coilover mounts
- Note – Will not fit Cobra models with factory IRS
- Grade 8 mounting hardware Included
- Tab width to mount the coilover is 1.5” wide x ½” I.D. top
- Tab width to mount the coilover is 1.375” wide x ½” I.D. bottom
- Brackets are black powdercoated for added corrosion resistance
