No products in the cart.
Control Arm Bushings – Buick Skylark 1964-1972 Rear, Upper – JCPG
MF Part #: CE-9112A
$187.99
- Made in USA
- Lifetime Warranty
1 in stock
DESCRIPTION
For the 1964-1972 Buick Skylark. JCPG Johnny Joint Differential Bushing Kits are the perfect addition for your GM A-Body rear axle housing. Designed to enhance suspension articulation and overall handling performance for a superior driving experience. Made in the U.S.A, JCPG’s Johnny Joint Rod Ends have been a staple in the automotive aftermarket since 1996!
This JCPG Johnny Joint differential kit replaces rubber, rear differential housing upper control arm bushings with CNC-machined joints for a quieter, smoother and more capable rear end setup. When installed, these JCPG Johnny Joints allow maximum articulation out of your rear suspension, as compared to rigid urethane bushings commonly found on the market for this location.
Each JCPG Johnny Joint offers 30 degrees of articulation capability, allowing your suspension to handle a wide range of movements with ease.
*Note: If you are using our Currectrac Control Arms (Sold Separately), this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.
*Note: For use on factory, cast iron, GM 10 or 12 bolt A-body axle housings ONLY
Upgrade your vehicle’s rear suspension setup with this comprehensive kit, engineered for strength, reliability, and ease of installation.
Get your 1964-1972 GM A-Body rear suspension dialed in with this complete JCPG rear Johnny Joint differential kit today.
- Kit fits 1964-1972 GM A-Body sedans, station wagons, and El Caminos
- Includes: 2 Johnny Joints for both sides of the differential housing
- Includes: Greasable Bolts with Hardware
- Includes: 1 Installation Tool
- Fully assembled and ready for use straight out of the box
- Easy press-in installation (using supplied tool)
- Bolt-on design for factory like fitment and easy installation
- Johnny Joints provide 30 degrees of travel for enhanced suspension articulation
- 2 in. O.D. x 1.20 in. wide barrel dimensions
- 2.445 in. wide x .515 in. thru-hole pivot ball
- 1/2 in.-20 x 3 1/2 in. long greasable bolts for greasing
- Clear zinc plate finish ensures durability and corrosion resistance
- For use on factory, cast iron, GM 10 or 12 bolt A-body axle housings ONLY
- Made in the U.S.A.
THIS PRODUCT FITS
1964-1972 Buick GS
1964-1972 Buick Skylark
1964-1972 Chevrolet Chevelle
1964-1972 Chevrolet El Camino
1970-1972 Chevrolet Monte Carlo
1964-1972 Oldsmobile Cutlass
1964-1972 Oldsmobile 442
1969-1972 Pontiac Grand Prix
1964-1972 Pontiac GTO
1964-1972 Pontiac LeMans
INSTALLATION GUIDES
ADDITIONAL INFORMATION
- Manufacturer: JCPG
- Vehicle Year: 1964-1967 or 1968-1972
- Manufacturer Part #: CE-9112A
- Bushing Style: Johnny Joint Rod End
- Position: Rear, Upper
- Direct Bolt On: Yes
- Greasable: Yes
- Bushing Material: Rubber
- Hardware Included: No
- Adjustable: No
- Quantity: 2
- Notes, Upper Control Arms: For use on factory, cast iron, GM 10 or 12 bolt A-body axle housings ONLY. Kit replaces stock rubber bushings or any aftermarket urethane bushing that may have been installed into your housing
- Vehicle Make: Buick
- Vehicle Model: Skylark
- Vehicle Specific: Control Arm Bushings
For the 1964-1972 Buick Skylark. JCPG Johnny Joint Differential Bushing Kits are the perfect addition for your GM A-Body rear axle housing. Designed to enhance suspension articulation and overall handling performance for a superior driving experience. Made in the U.S.A, JCPG’s Johnny Joint Rod Ends have been a staple in the automotive aftermarket since 1996!
This JCPG Johnny Joint differential kit replaces rubber, rear differential housing upper control arm bushings with CNC-machined joints for a quieter, smoother and more capable rear end setup. When installed, these JCPG Johnny Joints allow maximum articulation out of your rear suspension, as compared to rigid urethane bushings commonly found on the market for this location.
Each JCPG Johnny Joint offers 30 degrees of articulation capability, allowing your suspension to handle a wide range of movements with ease.
*Note: If you are using our Currectrac Control Arms (Sold Separately), this kit essentially finishes off the package by making all of your control arm mounting points Johnny Jointed and free to articulate.
*Note: For use on factory, cast iron, GM 10 or 12 bolt A-body axle housings ONLY
Upgrade your vehicle’s rear suspension setup with this comprehensive kit, engineered for strength, reliability, and ease of installation.
Get your 1964-1972 GM A-Body rear suspension dialed in with this complete JCPG rear Johnny Joint differential kit today.
- Kit fits 1964-1972 GM A-Body sedans, station wagons, and El Caminos
- Includes: 2 Johnny Joints for both sides of the differential housing
- Includes: Greasable Bolts with Hardware
- Includes: 1 Installation Tool
- Fully assembled and ready for use straight out of the box
- Easy press-in installation (using supplied tool)
- Bolt-on design for factory like fitment and easy installation
- Johnny Joints provide 30 degrees of travel for enhanced suspension articulation
- 2 in. O.D. x 1.20 in. wide barrel dimensions
- 2.445 in. wide x .515 in. thru-hole pivot ball
- 1/2 in.-20 x 3 1/2 in. long greasable bolts for greasing
- Clear zinc plate finish ensures durability and corrosion resistance
- For use on factory, cast iron, GM 10 or 12 bolt A-body axle housings ONLY
- Made in the U.S.A.
Reviews
There are no reviews yet.