Got a classic truck? Check out AZ Pro Performance for the latest coilovers, shocks and suspension kits for your GM pickup. AZ Pro Performance, based out of Arizona, specializes in GM truck performance parts and upgrades. If you’re looking to freshen up your gauges, lower your truck or upgrade to Aldan coilovers, give the team at AZ Pro Performance a call today. Part # 300136 shown below See more C10,…

This custom S10 chassis was built by Brandon at Self Made Fab out of Ohio. Checkout this custom rear Cantaleiver suspension here. The rear chassis features Aldan’s Regulator Series Aldan coilovers with a fully custom cantilever setup that is also running airbags. This setup allowing the truck to be static as well as having the capabilities to raise and lower the rear end. Part # AR656300B was featured on this…

1968 Chevelle runs our Road Comp Series Coilovers all day long. This beautiful 1968 Chevelle has been daily driven since 2012. The owner contacted us and ordered up a full set of our front and rear coilovers with springs spec’d for the street. Our single adjustable coilover kit is used on this Chevelle. The owner is running heavier 160 lb springs to accommodate for the full 4 doors and extra…

This 1980 Chevy Malibu aka the “Maliboost” is getting some serious upgrades see more here. Nick who owns the Maliboost is running our Striker series line of Coilovers. Nick had a built big block engine with custom twin turbo set up sending this car into the low 8’s. Nick is in the process of swapping out his big block for a new LS with a custom twin turbo set up….

If you’re building or driving a 1968-1974 Chevrolet Nova or GM X-Body and are looking to upgrade your suspension, at Aldan American we’ve got a full line of bolt on suspension performance kits for your ride. Aldan GM X-Body suspension packages are designed to convert your stock, front suspension to fully ride-height adjustable coil-overs with adjustable shock absorbers in the rear. Designed for the 1968-1974 Chevrolet Nova, and GM X-Body…

Scotts Hot Rods out of Tennessee recently featured one of their IFS kits with Aldan shocks. Check out the photoshoot here.  If you’re looking for a custom IFS full chassis or 4-link suspension made in the USA Scotts Hot Rods makes some of the best products on the market today. Aldan American Phantom Series are included with Scott’s IFS and our fully adjustable and made in the USA. Scott’s Hot…

Calculating Coil Spring Rates? Corner weights are key. Read on here. If you’re looking to setup your car or truck with coilovers, give our team at Aldan a call 310-834-7478. Our team has been setting up chassis and determining spring rates for drag cars, custom chassis, as well as stock and modified cars and trucks for over four decades. To be 100% accurate in determining the spring rate you’ll need…

Coyotoe swap and custom chassis for a 49’ Merc. Check out the latest from D.O.C. Danny and his team at Danny’s Original Customs built this full custom chassis for a customer and their 1949 Mercury. This Mercury has a custom chassis built specifically for that car and the engine has been swapped for a Coyote 5.0 L V8. D.O.C is an official Aldan American dealer and outfitted this chassis with…

The team at MetalOx Fab is putting together some incredible C10 trucks. Check out their latest build here. MetalOx Fab out of Arizona is turning longbed trucks in to shortbeds and in the process they’re building some awesome C10 trucks at their shop. This C10 from MetalOx Fab is getting a full custom chassis from CB Chassis Products aka Choppin Block with Aldan Phantom Series coilovers on all four corners….

Treadwear’s Scraptona comes to life see the full feature on this one-off, custom Dodge Daytona. The “Scraptona” is one hell of a ride, equipped with a fully built NASCAR engine,  tube chassis and custom wheels. This custom MOPAR is capable on the street or at the track. The Scraptona uses Aldan’s Phantom Series coilovers to create the perfect ride both on the track and on the road. Check out Treadwears…