Scotts Hot Rods out of Tennessee recently featured one of their IFS kits with Aldan shocks. Check out the photoshoot here. If you’re looking for a custom IFS full chassis or 4-link suspension made in the USA Scotts Hot Rods makes some of the best products on the market today. Aldan American Phantom Series are included with Scott’s IFS and our fully adjustable and made in the USA. Scott’s Hot…
Calculating Coil Spring Rates? Corner weights are key. Read on here. If you’re looking to setup your car or truck with coilovers, give our team at Aldan a call 310-834-7478. Our team has been setting up chassis and determining spring rates for drag cars, custom chassis, as well as stock and modified cars and trucks for over four decades. To be 100% accurate in determining the spring rate you’ll need…
Coyotoe swap and custom chassis for a 49’ Merc. Check out the latest from D.O.C. Danny and his team at Danny’s Original Customs built this full custom chassis for a customer and their 1949 Mercury. This Mercury has a custom chassis built specifically for that car and the engine has been swapped for a Coyote 5.0 L V8. D.O.C is an official Aldan American dealer and outfitted this chassis with…
The team at MetalOx Fab is putting together some incredible C10 trucks. Check out their latest build here. MetalOx Fab out of Arizona is turning longbed trucks in to shortbeds and in the process they’re building some awesome C10 trucks at their shop. This C10 from MetalOx Fab is getting a full custom chassis from CB Chassis Products aka Choppin Block with Aldan Phantom Series coilovers on all four corners….
Treadwear’s Scraptona comes to life see the full feature on this one-off, custom Dodge Daytona. The “Scraptona” is one hell of a ride, equipped with a fully built NASCAR engine, tube chassis and custom wheels. This custom MOPAR is capable on the street or at the track. The Scraptona uses Aldan’s Phantom Series coilovers to create the perfect ride both on the track and on the road. Check out Treadwears…
Aldan American and Ben Kahan recently collaborated to make a full feature installation of our Road Comp Series Suspension Kit for Ben’s 1965 Ford Mustang Ben’s install video was recently featured on Summit Racing’s On All Cylinders Blog, see the story here Ben’s Mustang has a small block 289, T4 4-speed, and our full Road Comp Series front coilover conversion kit with our Aldan TrueLine Series, rear adjustable shocks. Ben used our Suspension Kit…
After competing in last year’s Muscle Challenge, the team from One Off Rides Garages new build will be joining us again for 2019. James W will be competing this year in his 1968 Chevelle. The team at One Off Rides Garage is currently being prepping this Chevelle to compete at this year’s Super Chevy Challenge. Aldan American is setting this Chevelle up with our GM Road Comp Series Coilovers for…
Rob from Southern California has some serious horsepower in his 68′ LS swapped and supercharged Chevelle. Rob’s 1968 Chevelle is running our complete Road Comp Series, A-Body coilover conversion kit on his car. Our Aldan front coilovers allow up to 2.0” of lowering and our rear coilovers for the 1964-1967 and 1968-1972 GM A-Body chassis’ allow up to 3.0” of lowering. This complete combo helped our friend Rob get his…
This 1975 was recently acquired by James here in LA. This stock ranch truck is currently being prepped to run our new C10 coilover conversion kit. (BEFORE Coilovers) James’ C10 is mostly original in regard to the suspension set up. James’ plans are to lower the truck front and rear and add coilovers on all four corners with a goal of having a pro-touring, daily driver capable of any auto-cross….
Manny used our Road Comp Series Coilover Conversion kit on his GMC C1500 to lower his stance and improve his ride quality see this full GMC truck build here. This OBS truck was designed as a 90’s style throwback build with custom boyd coddington from 1996. This custom pickup truck has our Aldan coilovers upfront and a flip kit in the rear providing the perfect stance. Part # 300132 shown…