This is a 1932 Ford Boyster II is a modern tribute to the original Boydster originally designed by Chip Foose and Boyd Coddington. Vince U. built this car using Phantom Series shocks to create the perfect ride. See our full Aldan line here

SO-Cal Speed Shop’s 32’ Ford Build. So-Cal Speed shop is known for building some of the finest street rods in the country. This classic hot rod was a feature car at SEMA in the Ford both a few years ago and it’s one of our favorite 32’s. This So-Cal 32’ features So-Cal’s Aldan Series coilovers on the rear 4-link suspension keeping the massive 5.0L Coyote motor’s power to the ground….

Fully built Ford F100 Truck Gets C4 Corvette Suspension with Coilovers. See full story here Link Motorsports custom built a Ford F100 using our Regulator Series Coilovers. This F100 is equipped with a Chevelle front clip and has Flat Out Engineering’s custom C4 Corvette suspension kit outfitted in the rear. Disc brakes, upgraded suspension and tons of custom parts and fabrication will make this F100 stand out from the crowd…

Mustang Monthly Magazine covered a full install of our coilover conversion kit on a 66 Ford Mustang owned by the team at Mustang Country here in Southern California. Mustang Monthly called our kit, “one of the easiest coilover kits to install.” This 1966 Mustang had a 6-cylinder that was going to be swapped for a V8. We ran our small block, 450 spring kit and converted the front suspension on…

Mustang build underway with a full R3PP suspension kit at Autoworks Parts. See more. Our friends over at Autoworks Parts are setting up their in house Mustang build with a full IFS and rear suspension kit from R3 Performance Parts. This custom build features R3’s custom front suspension along with their full rear suspension kit. R3 chassis include our Phantom Series line of adjustable coilover shocks with our linear, coil-springs….

Do you have a 2015-2019 Ford Mustang? Do you want to eliminate that wheel gap? See Cesars 2017 and our install feature here. Cesar owns a 2017 Ford Mustang GT. This Mustang was stock and in need of new springs to lower the car’s center of gravity and improve the overall drivability and performance of his S550 Mustang. “Credit for pic to @ Muscle Mustangs & Fast Fords Magazine” The…

1965 Ford Mustang Fastback resurrection. Mike of @classicmustangs429 on Instagram and YouTube recently got his barn find, Mustang Fastback up and running and back on the road. 1965 Ford Mustang Fastback resurrection. Mike of @classicmustangs429 on Instagram and YouTube recently got his barn find, Mustang Fastback up and running and back on the road. Part # 300124 shown If you want to keep up on the restoration of this incredible Ford Mustang…

Calculating Coil Spring Rates? Corner weights are key. Read on here. If you’re looking to setup your car or truck with coilovers, give our team at Aldan a call 310-834-7478. Our team has been setting up chassis and determining spring rates for drag cars, custom chassis, as well as stock and modified cars and trucks for over four decades. To be 100% accurate in determining the spring rate you’ll need…

Aldan American and Ben Kahan recently collaborated to make a full feature installation of our Road Comp Series Suspension Kit for Ben’s 1965 Ford Mustang Ben’s install video was recently featured on Summit Racing’s On All Cylinders Blog, see the story here  Ben’s Mustang has a small block 289, T4 4-speed, and our full Road Comp Series front coilover conversion kit with our Aldan TrueLine Series, rear adjustable shocks. Ben used our Suspension Kit…

If you’re looking to build a new, classic Mustang, check out R3 Performance Products. The team at R3 Performance Products manufactures new bodies for the classic Ford Mustang. Under these new Mustang bodies, you’ll find a full custom suspension developed by the team at R3PP. The front suspension uses our Aldan, Phantom Series coilovers with R3’s custom IFS. In the rear, R3 has developed a full cantilever coilover suspension using…