1958-1970 GM B-Body Suspension Kits
Road Comp Series Suspension Kits are now available for the 1958-1970 Impala, Biscayne, Caprice, and other full size GM cars. Made in the U.S.A. Aldan full size suspension kits include everything you need to fully convert your front, factory suspension to adjustable coilover shocks and springs with adjustable rear shock absorbers. Road Comp Series suspension kits include ride height adjustable coilovers that allow up to 0.0-2.0″ inches of lowering capabilities…
1968-1974 GM X-Body Coilovers and Suspension Kits
If you’re building or driving a 1968-1974 Chevrolet Nova or GM X-Body and are looking to upgrade your suspension, at Aldan American we’ve got a full line of bolt on suspension performance kits for your ride. Aldan GM X-Body suspension packages are designed to convert your stock, front suspension to fully ride-height adjustable coil-overs with adjustable shock absorbers in the rear. Designed for the 1968-1974 Chevrolet Nova, and GM X-Body…
Scotts Hot Rods C10 IFS
Scotts Hot Rods out of Tennessee recently featured one of their IFS kits with Aldan shocks. Check out the photoshoot here. If you’re looking for a custom IFS full chassis or 4-link suspension made in the USA Scotts Hot Rods makes some of the best products on the market today. Aldan American Phantom Series are included with Scott’s IFS and our fully adjustable and made in the USA. Scott’s Hot…
Getting Corner Weights To Calculate Spring Rates
Calculating Coil Spring Rates? Corner weights are key. Read on here. If you’re looking to setup your car or truck with coilovers, give our team at Aldan a call 310-834-7478. Our team has been setting up chassis and determining spring rates for drag cars, custom chassis, as well as stock and modified cars and trucks for over four decades. To be 100% accurate in determining the spring rate you’ll need…
Aldan C10 Street Trucks Feature
Aldan’s 1971 C10 feature from Street Truck Magazine. Read on here. The team at Street Trucks Magazine produced a complete feature on the Aldan 1971 C10. This truck was designed to be a street truck capable of any track day. Check out the full feature from Street Trucks Magazine via the link below. Aldan C10 coilover conversion kit, Part #300136 shown below Check out Street Trucks here: Instagram: @streettrucks Website:…
D.O.C’s Custom 1949 Mercury Chassis
Coyotoe swap and custom chassis for a 49’ Merc. Check out the latest from D.O.C. Danny and his team at Danny’s Original Customs built this full custom chassis for a customer and their 1949 Mercury. This Mercury has a custom chassis built specifically for that car and the engine has been swapped for a Coyote 5.0 L V8. D.O.C is an official Aldan American dealer and outfitted this chassis with…
MetalOx Fab Custom C10
The team at MetalOx Fab is putting together some incredible C10 trucks. Check out their latest build here. MetalOx Fab out of Arizona is turning longbed trucks in to shortbeds and in the process they’re building some awesome C10 trucks at their shop. This C10 from MetalOx Fab is getting a full custom chassis from CB Chassis Products aka Choppin Block with Aldan Phantom Series coilovers on all four corners….
Tredwear’s Scraptona Runs Aldans
Treadwear’s Scraptona comes to life see the full feature on this one-off, custom Dodge Daytona. The “Scraptona” is one hell of a ride, equipped with a fully built NASCAR engine, tube chassis and custom wheels. This custom MOPAR is capable on the street or at the track. The Scraptona uses Aldan’s Phantom Series coilovers to create the perfect ride both on the track and on the road. Check out Treadwears…
Summit Racing’s On All Cylinders Blog
Aldan American and Ben Kahan recently collaborated to make a full feature installation of our Road Comp Series Suspension Kit for Ben’s 1965 Ford Mustang Ben’s install video was recently featured on Summit Racing’s On All Cylinders Blog, see the story here Ben’s Mustang has a small block 289, T4 4-speed, and our full Road Comp Series front coilover conversion kit with our Aldan TrueLine Series, rear adjustable shocks. Ben used our Suspension Kit…
R3 Performance Products Mustangs
If you’re looking to build a new, classic Mustang, check out R3 Performance Products. The team at R3 Performance Products manufactures new bodies for the classic Ford Mustang. Under these new Mustang bodies, you’ll find a full custom suspension developed by the team at R3PP. The front suspension uses our Aldan, Phantom Series coilovers with R3’s custom IFS. In the rear, R3 has developed a full cantilever coilover suspension using…